BENDPAK
XPR-10S

BLOW OUT PRICE!!!
WHILE SUPPLIES LAST ONLY

$2920
FREE SHIPPING*

*Rural Zip Code Fee May Apply
Residential Delivery Fee May Apply
Call for Details
207-318-0228


Available for
Fast Delivery and Installation!

Sales:
207.318.0228
RickFloyd@carsintheair.com

Service:
207.632.6624
Service@carsintheair.com

Featured BendPak
XPR-10


FEATURES
•10,000-pound lifting capacity
•Wide or narrow configuration
•Single piece columns
•Single point safety release
•Dual hydraulic "Direct-Drive" cylinders
•Oversize 53" tall carriage for superior strength and durability
•Drop-end arms provide a lower pad height
•Triple-telescoping arms provide increased range for lifting point access
•Electric/hydraulic power system
•Large, 19" x 17" steel base plates
•Self-lubricating dura-glide polyethylene bearing system
•Safety locks in each column spaced every 3-inches
•Automatic arm restraints
•Heavy-duty dual 3/8" equalizer cables with oversizecable sheaves
•Padded overhead safety-shutoff bar
•Truck and van adapters standard
•ETL Approved

CALL US TODAY
207.318.0228

All Lifts Are Not Created Equal!
CLICK FOR "A STUDY IN LIFT DESIGN"

BY BENDPAK
It's a very informative bit of reading that includes:
Four Post Lift Design
Two Post Lift Comparison
Engineering Report
Manufacturing Facility

SPECIFICATIONS
MODEL - XPR-10

  • Lifting Capacity* 10,000 Lbs.
  • *Max Capacity / Front Axle
  •  5,000 Lbs.
  • *Max Capacity / Rear Axle
  •  5,000 Lbs.
  • Height Overall(*): 145"
  • Width Overall (Outside of Base Plate): 132"
  • Width (Outside of Columns): 124"
  • Floor to Overhead Switch(*): 141"
  • Inside Columns: 102"
  • Reach (Front Arm Min.): 25"
  • Reach (Front Arm Max.): 46"
  • Reach (Rear Arm Min.): 34"
  • Reach (Rear Arm Max.): 55"
  • Min. Pad Height: 4"
  • Rise: 69"
  • Max Lift Height (Pad Only): 73"
  • Max Lift Height (6" Adapter): 79"
  • Drive-Thru Clearance: 93"
  • Motor (**): 220 VAC / 60 Hz. 1Ph.
  • Time of full Rise: 45 Seconds
  • Max Load per Arm: 2,500 Lbs.   

* An optional bolt-on top extension for columns raises the overhead bar an

additional 24". Must be ordered from factory at time of order.

** Special voltages available upon request.

The design, material and specifications are subject to change without notice.

Shipping Weight - 1,736 Lbs.

XPR-10
(WIDE CONFIGURATION)
MODEL - XPR-10


Lifting Capacity* 10,000 Lbs.
Max Capacity / Front Axle 5,000 Lbs.
Max Capacity / Rear Axle 5,000 Lbs.
Height Overall(*): 145"
Width Overall (Outside of Base Plate): 145"
Width (Outside of Columns): 137"

Floor to Overhead Switch(*): 141"
Inside Columns: 115"
Reach (Front Arm Min.): 28"
Reach (Front Arm Max.): 55"

Reach (Rear Arm Min.): 34"
Reach (Rear Arm Max.): 55"
Min. Pad Height: 4"
Rise: 69"
Max Lift Height (Pad Only): 73"
Max Lift Height (6" Adapter): 79"
Drive-Thru Clearance: 106"
Motor (**): 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 45 Seconds
Max Load per Arm: 2,500 Lbs.
Shipping Weight - 1,764 Lbs

24/7

Click Above For One Of The Best Comparisons We've Ever Seen...
It's a very informative and compelling side by side comparison of BendPak and Rotary brand lifts.
Don't get us wrong, Rotary makes fantastic and very popular lifts.
This comparison is provided to help you make the best decision for your application...


BendPak Two Post Lifts         

BendPak Four Post Lifts

CLICK TO VIEW OTHER MODELS ON THE BENDPAK WEBSITE

WE ACCEPT MASTERCARD, VISA AND DISCOVER

BendPak

FREE SHIPPING ON ALL
BENDPAK LIFTS!

LIFTS ETC LLC brings you carsintheair.com:  For Automotive Lifts in Maine and New Hampshire, Lifts Etc LLC is your source. New Lifts, Used Lifts, Lift Service, Maintenance, Safety Seminars - all at prices you can afford!

Car Lifts in Maine